3d过渡金属掺杂M_2@Si_(20)(M=Sc-Zn)团簇的密度泛函理论研究

利用密度泛函理论(DFT)研究3d过渡金属掺杂硅团簇的几何结构和稳定性,计算了绝热电子亲和能和垂直电离能,内嵌双金属间距,自旋磁矩等.结果表明内嵌的Sc、Ti、V、Mn金属二聚体和十二面体硅笼构成了稳定的富勒烯结构,随着d电子数目的增加其内嵌的富勒烯构型有部分畸变,总体而言Si_(20)团簇掺杂双金属后稳定性得到了提高.     

Na原子链表面等离激元特性的含时密度泛函研究

本文用含时密度泛函理论研究了线性Na原子链的表面等离激元机理.主要在原子尺度下模拟计算了体系随着原子数增加及原子间距变化的集体激发过程.研究发现线性原子链有一个普遍的特性——存在一个纵模和两个横模.两个横模一般在实验上很难被观测到.纵模随着原子链长度增加,能量红移的同时,该纵模主峰的强度呈线性增长.随着原子个数的增加,端点模式(TE)开始蓝移,能量和偶极强度都逐渐趋向饱和.横模能量被劈裂的原因概括如下:(一)每个位置的电子受到的势不同,在两端的电子受到的势要比在中间的电子受到的势要高,因此两端的电荷积累也比中间多;(二)端点存在悬挂键,所以中间的电子-电子间相互作用与端点的不一样,这两方面又都与原子间距d有关.     

A new study of associating inhomogeneous fluids with classical density functional theory

ABSTRACT

A new density functional for the study of associating inhomogeneous fluids based on Wertheim's first-order thermodynamic perturbation theory is presented and compared to the most currently used associating density functionals. This functional is developed using the weighted density approximation in the range of association of hard spheres. We implement this functional within the framework of classical density functional theory together with modified fundamental measure theory to account for volume exclusion of hard spheres. This approach is tested against molecular simulations from literature of pure associating hard spheres and mixtures of non-associationg and associating hard spheres with different number of bonding sites close to a hard uniform wall. Furthermore, we compare and review our results with the performance of associating functionals from literature, one based on fundamental measure theory and the inhomogeneous version of Wertheim's perturbation theory. Results obtained with classical DFT and the three functionals show excellent agreement with molecular simulations in systems with one hard wall. For the cases of small pores where only one or two layers of fluid are allowed discrepancies between results with classical DFT and molecular simulations were found.     

Solvable Model of a Generic Driven Mixture of Trapped Bose–Einstein Condensates and Properties of a Many-Boson Floquet State at the Limit of an Infinite Number of Particles

A solvable model of a periodically driven trapped mixture of Bose–Einstein condensates, consisting of N1 interacting bosons of mass m1 driven by a force of amplitude fL,1 and N2 interacting bosons of mass m2 driven by a force of amplitude fL,2, is presented. The model generalizes the harmonic-interaction model for mixtures to the time-dependent domain. The resulting many-particle ground Floquet wavefunction and quasienergy, as well as the time-dependent densities and reduced density matrices, are prescribed explicitly and analyzed at the many-body and mean-field levels of theory for finite systems and at the limit of an infinite number of particles. We prove that the time-dependent densities per particle are given at the limit of an infinite number of particles by their respective mean-field quantities, and that the time-dependent reduced one-particle and two-particle density matrices per particle of the driven mixture are 100% condensed. Interestingly, the quasienergy per particle does not coincide with the mean-field value at this limit, unless the relative center-of-mass coordinate of the two Bose–Einstein condensates is not activated by the driving forces fL,1 and fL,2. As an application, we investigate the imprinting of angular momentum and its fluctuations when steering a Bose–Einstein condensate by an interacting bosonic impurity and the resulting modes of rotations. Whereas the expectation values per particle of the angular-momentum operator for the many-body and mean-field solutions coincide at the limit of an infinite number of particles, the respective fluctuations can differ substantially. The results are analyzed in terms of the transformation properties of the angular-momentum operator under translations and boosts, and as a function of the interactions between the particles. Implications are briefly discussed.     

Probing the Local Magnetic Structure of the [FeIII(Tp)(CN)3]− Building Block Via Solid-State NMR Spectroscopy,Polarized Neutron Diffraction,and First-Principle Calculations

The local magnetic structure in the [Fe^III(Tp)(CN)₃]⁻ building block was investigated by combining paramagnetic Nuclear Magnetic Resonance (pNMR) spectroscopy and polarized neutron diffraction (PND) with first-principle calculations. The use of the pNMR and PND experimental techniques revealed the extension of spin-density from the metal to the ligands, as well as the different spin mechanisms that take place in the cyanido ligands: Spin-polarization on the carbon atoms and spin-delocalization on the nitrogen atoms. The results of our combined density functional theory (DFT) and multireference calculations were found in good agreement with the PND results and the experimental NMR chemical shifts. Moreover, the ab-initio calculations allowed us to connect the experimental spin-density map characterized by PND and the suggested distribution of the spin-density on the ligands observed by NMR spectroscopy. Interestingly, significant differences were observed between the pseudo-contact contributions of the chemical shifts obtained by theoretical calculations and the values derived from NMR spectroscopy using a simple point-dipole model. These discrepancies underline the limitation of the point-dipole model and the need for more elaborate approaches to break down the experimental pNMR chemical shifts into contact and pseudo-contact contributions.     

Making Use of the Direct Process Residue: Synthesis of Bifunctional Monosilanes

The industrial production of monosilanes Me_nSiCl_4−n (n=1–3) through the Müller–Rochow Direct Process generates disilanes Me_nSi₂Cl_6−n (n=2–6) as unwanted byproducts (“Direct Process Residue”, DPR) by the thousands of tons annually, large quantities of which are usually disposed of by incineration. Herein we report a surprisingly facile and highly effective protocol for conversion of the DPR: hydrogenation with complex metal hydrides followed by Si−Si bond cleavage with HCl/ether solutions gives (mostly bifunctional) monosilanes in excellent yields. Competing side reactions are efficiently suppressed by the appropriate choice of reaction conditions.     

Preparation of an efficient catalyst through injection of CuI on modified poly (styrene-co-maleic anhydride) and theoretical investigation of the structural and electronic properties of catalyst

A novel polymer supported [poly (styrene-co-maleic imide) (SMI)]Cu(I) nano-particles was prepared via in situ reaction of 4-amino-5-methyl-4H-1,2,4-triazole-3-thione with [poly (styrene-co-maleic anhydride)] (SMA) along with immobilization of CuI. These nano-particles were fully characterized by using scanning electron microscopy (SEM), energy dispersive spectroscopy analysis, Xray (EDAX), inductively coupled plasma (ICP) analysis, ¹H NMR and FT-IR techniques. Moreover, the structural and electronic features of metal–ligand interactions in the complex model of polymer-supported copper nanocatalyst were assessed using density functional theory calculations. The catalytic activity of these supported Cu(I) nonoparticles was examined in one of the classiest name reaction so–called “click reaction” which is coined K. B Sharpless for the regioselective synthesis of 1,2,3-triazole derivatives using a multicomponent reaction (MCR) involving benzyl halides, sodium azide and terminal alkynes in water as a green solvent. This heterogeneous catalyst showed excellent catalytic activity and was separated by simple filtration and was used at least in five consecutive runs without a significant decrease in its activity.     

An unprecedented transformation mode in aluminium oxazoline-amido-phenolate complexes

This paper describes the effect of solvent-induced synthetic routes of aluminium pendant oxazoline-amido-phenolate complexes. Treatment of ligand precursor L with AlMe₃ in a 1:1 ratio in diethyl ether yielded the four-coordinated complex (LAlMe)₂. Reaction of ligand precursor L with AlMe₃ in a 1:2 ratio in hexane generated the four-coordinated complex L(AlMe₂)₂. A novel transformation mode occurred from L(AlMe₂)₂ to (LAlMe)₂ when using diethyl ether or tetrahydrofuran as solvent. A density functional theory computational study also supports a plausible mechanism. All results were supported by spectroscopic data and in agreement with single-crystal X-ray diffraction structural analysis.